Winterizing

To turn your timer off for the winter, you will want to blow out the lines first, to remove any water and prevent freeze damage. You can do this by attaching a compressor to your lines and running a quick manual cycle on all zones for 2-3 minutes. (see manual operation)
Once you’ve done that, your timer needs to be put in the “Off” mode.

  1. On your app, tap settings (gears) in the bottom right corner.
    Settings Icon
  2. Tap “Devices” followed by your timer.
    Devices Winterizing v2
  3. You should now see an option that says “Timer Run Mode”. Tap off.
    Detail Auto Winterizing Detail Off Winterizing
    Go back to the home page to confirm your timer is in the off mode.
    Homepage Off Winterizing

 

If you would like to do this at the timer, simply rotate the dial to the off position and press in on the dial to select.

The timer will retain the programming until it is returned to the auto programming. It will not run any of the programs unless returned to the auto position.